60
1. Handle.
2. Mist nozzle.
3. On/off knob POWER.
4. Humidity level knob LEVEL.
5. POWER/NO WATER control lamp.
6. Water tank.
7. Base.
Names of parts
Operating instructions
On/off knob POWER
(3)
Turn the knob POWER
(3)
clockwise 1 time to the
COOL
position for Ultrasonic (cool
mist) mode.
Turn the knob POWER
(3)
clockwise one more time to the
WARM
position for warm
mist (hybrid humidifying) mode. Set the knob POWER
(3)
in the
OFF
position to turn
off the appliance.
Humidity level knob LEVEL (4)
Turn the humidity level knob LEVEL
(4)
clockwise or counter-clockwise to set the
desired mist volume.
LOW
–
HIGH
.
POWER/NO WATER (5) control lamp
The POWER/NO WATER
(5)
control lamp illuminates green to indicate that the
appliance is operating. It illuminates red to indicate that there is no water in the
humidifier. In that case the appliance will not operate. Fill the tank with water for the
appliance to restart. The POWER/NO WATER control lamp will illuminate green again.
Preparing for operation
1. Remove the water tank
(6)
from the appliance using the attached handle.
2. Remove the mist nozzle
(2)
from the water tank
(6)
.
3. Turn the water tank
(6)
upside down and remove the water tank cap by turning it
counter-clockwise.
NOTE: The Nano-Silver water filter is attached to the water tank cap. If you do
not wish to use the filter, it can be removed by turning it counter-clockwise (see