![background image](/i/zelmer/153152/zelmer-52460-52490/h/zelmer-52460-52490-060.png)
60
FEATURES
ZELMER cooker hood is used to extract cooking fumes. It requires to install a duct ex
-
tracting air to the outside. The length of the duct (most commonly a tube Ø 150 mm,
Ø 120 mm) should not exceed 4-5 m. After installing the active-coal filter which is avail
-
able in the sales network, the cooker may operate as an odor absorber. In this case it is
not required to install the duct extracting the air to the outside.
The cooker hood is a class II electrical appliance.
It is equipped with an independent lighting and an extract fan with three speed settings.
The cooker hood is designed for a permanent installation on a vertical wall above the gas
or electric cooker.
PARTS
The cooker hood is composed of the following elements (fig. 1):
bent glass C together with the body,
●
telescopic chimney comprising of:
●
upper chimney A,
●
lower chimney C equipped with
●
the lighting and the fan unit,
wall hanger D,
●
reduction adaptor,
●
air exhaust fin.
●
ASSEMBLY
In order to assemble the cooker hood:
1. Fix the wall hanger D at an appropriate height.
2. Hang the hood body C and lower chimney B (both ele
-
ments should constitute an integral part).
3. Plug in the cooker hood.
4. Connect the cooker hood to the ventilation duct.
5. Install the telescopic chimney column A and B.