![background image](/i/zelmer/151388/zelmer-sh2310/h/zelmer-sh2310-113.png)
113
Polski
Magyar
Română
Ру
сск
ий
Česky
Slovenčina
Бълг
арск
и
Ук
раїнськ
а
English
SH2310-005_v01
Charging
1
Make sure that the shaver is off. To
turn it off press the ON/OFF button. Lock
the shaving head (see the “SHAVING
HEAD LOCK” section) and put on the cap.
The battery cannot be charged
when the shaver is on.
2
Insert the socket plug of the AC
adaptor into the socket at the bottom of the
shaver.
Before putting the plug of the AC adaptor into the socket of the shaver,
make sure that the socket is completely dry to prevent any possible
malfunction.
3
Insert the outlet plug of the AC adaptor into an appropriate outlet (see the rating plate
on the AC adaptor).
– The shaver is fully charged in approximately 60 minutes.
– Charging may be completed in less than 60 minutes if the battery is not
completely empty and the safety function works to prevent overcharge.
4
When charging is completed, unplug the AC adaptor from the outlet.
When unplugging the AC adaptor, do not pull the cord, as this may damage
the AC adaptor. Be sure to hold the plug to pull it out.
On a fully charged battery the shaver will operate for approx. 30 minutes.
Battery level indicator
●
During charging:
The lights flash and then light up one by one from
bottom to top indicating the battery level.
●
After full charge:
All the lights flash.
●
While shaving:
The lights go out one by one as the battery level
decreases. When the battery is empty the “Empty”
light comes on.
Power supply
100-240 V AC
ON/OFF button
Shaving head
lock
Battery level indicator
lights
FULL
EMPTY