15
“192.168.1.1”.
Subnet Mask: The router's internal LAN subnet mask. The default setting is
“255.255.255.0”.
DHCP Server: DHCP Server will automatically assign IP addresses to devices on
the network. The default setting is “Enable”.
DHCP IP Pool: Set a range of IP addresses available to access.
DHCP Lease Time: Amount of time that a Wi-Fi enabled device can use its
assigned IP address before it is required to renew the lease.
7.4 Language
Change language:
1,Choose the language,
;
2, Click <Apply>.
The default language is English.
7.5 Diagnostic
Click <Reboot> to restart the device.
7.6 Advanced
On this page, You can save the current configuration or restore a saved configuration.
Save the configuration
1,Click <Download>;
2,Select the location to save current settings.
Restore the configuration
1,Click <Upload>;
2,Select a file saved previously to restore the settings.
Reset
Reset the device to the original factory settings. you can also use the hardware reset
button on the bottom of the device, marked with R.
MAC Filtering
MAC filtering is used to control specific MAC addresses to access.
Select “Disable" : All terminal devices are allowed to access the network.
Select “Enable": Only devices in this list are allowed to access the network.
You can add, edit or delete the configuration.
Note: The maximum allowed MAC list is 10.
8 Battery Charging