4

EUROLIGHT LD6230 User Manual

1.  Introduction

As a BEHRINGER EUROLIGHT LD6230 owner, you have a high-end dimmer pack 

at your hands. It was designed to answer to the high demands of lighting 

professionals working in television, theatres and live events, and is therefore 

universally applicable.
The EUROLIGHT LD6230 provides all necessary features for controlling your light 

show, yet it is clearly laid out and easy to use. It gives you the choice between 

analog and digital DMX control. Comprehensive LEDs let you easily detect signal 

problems so you can effortlessly eliminate them as soon as they occur. 

◊ 

The following user’s manual is intended to familiarize you with the 
unit’s control elements, so that you can master all the functions. 
After having thoroughly read the user’s manual, store it at a safe place 
for future reference. Installation Instructions supplement the user’s 
manual and are included in the shipment.

◊ 

A qualified professional needs to be present during the unit’s 
installation and initial operation. More information about this topic is 
covered under Installation instructions.

1.1  Before you get started

1.1.1  Shipment

The LD6230 was carefully packed at the assembly plant to assure secure 

transport. Should the condition of the cardboard box suggest that damage 

may have occurred please inspect the unit immediately and look for physical 

indications of damage.

◊ 

Damaged units should NEVER be sent directly to us. Please inform 
the dealer from whom you acquired the unit immediately as well 
as the transportation company from which you took delivery. 
Otherwise, all claims for replacement/repair may be rendered invalid.

1.1.2  Initial operation

Please make sure the unit is provided with sufficient ventilation, and never place 

the EUROLIGHT on top of an amplifier or in the vicinity of a heater to avoid the risk 

of overheating.

◊ 

Please make sure that the unit is grounded at all times. For your own 
protection, you should never tamper with the grounding of the cable or 
the unit itself.

◊ 

To avoid damage to your equipment, always make sure your dimmer 
pack is disconnected from the mains before you connect or disconnect 
spotlights or other lighting paraphernalia.

◊ 

Make sure that only sufficiently qualified persons install and operate 
your LD6230. To avoid damage or altering of its performance through 
electrostatic discharge, make sure that all people handling the LD6230 
are properly grounded both during and after the installation.

1.1.3  Rack installation 

The LD6230 requires two height units (2 HU) when installed in a 19-inch rack. 

Please make sure to leave an extra 4 inches (10 cm) of space behind the unit 

for wiring.
Please use M6 machine screws and nuts to install your LD6230 into a rack. 

1.1.4  Warranty

Please take a few minutes and send us the completely filled out warranty 

card within 14 days of the date of purchase. You may also register online at 

behringer.com. The serial number of your EUROLIGHT LD6230 ( 

(15)

 ) needed for 

registration is located at the rear panel of the unit. Failure to register your 

product may void future warranty claims.

1.2  The user’s manual

The user’s manual is designed to give you both an overview of the controls, 

as well as detailed information on how to use them. In order to help you 

understand the links between the controls, we have arranged them in groups 

according to their function. If you need to know more about specific issues, 

please visit our website at http://behringer.com.