Determining location and installation

1.  Removing transport safety bolts at the rear of the machine

The transport safety bolts must be removed before any operation of the machine. Bolt heads, marked “C”.

“C”, should be turned in a anti clockwise direction until the bolt can be partially withdrawn.

Remove transport  safety bolts and rubber bushes by pulling outwards. (A up/down action and a small squirt of washing up 
liquid should ease removal.)

Plastic plugs, supplied inside the  protective bag and  designated as “P”, should be  placed in the safety bolt holes according 

to the direction shown.

Attention!

Please  keep  the  safety  bolts  for  future  transportationand  reinstate  them  before  transporting  your  machine.  Never 

transport your machine without the transport bolts in position.

Never  place  your  machine  on  a  carpet.  This  prevents  air  circulation.  The  electrical  components  of the machine 

may overheat and may cause damage.

17