3  Steps before operating Fullautomatic Washing Machine and safety precautions

The current requirement in order for safe operation of this machine is 16 Ampheres. You will need to have a certified 

electrician to connect a 16 Amp fuse, if there is not enough current load.

Your washing machine is set to 230 Volts.

Do not forget to check the grounding in all cases of use with or without the transformer. Our company will not be 

responsible for any damages caused by operations without grounding.

The performance of the washing machine depends on the effectiveness of the cleaning agent. Stains can be 
permanent if low quality detergents are used. Please take necessary effort to clean the stained clothes as described 
in following pages before washing them in the machine.

Your washing machine is designed only for domestic use.

In order to bring the machine ready to use, please call your service technician or a certified plumber.

If the power cord or the plug is damaged, please call a certified technician.

Always use new “water inlet hose” received within your machine.

Please perform the first wash with detergent, at COTTON 90 program and without placing your laundry inside the 

washing machine. This will ensure that the drum is free from any left over dirt from production .

Due to the quality control processes during production, there may be some water left over in your machine. 

This does not cause any damage to your product.