Troubleshooting

34

Status Messages    

On-Screen Messages

Description

SEARCHING

Projector is searching for input.

ACQUIRING SIGNAL

Projector has identified the input signal and is run-
ning the auto image adjustment function.

OUT OF RANGE

Input signal frequency exceeds the projector’s range.

LAMP WARNING - 
CHANGE LAMP AND 
RESET LAMP TIMER! 

The lamp has been in operation for 1900 hours. 
Install a new lamp for optimal performance.

OUT OF LAMP USAGE 
TIME. YOU HAVE TO 
CHANGE THE LAMP!

The lamp has been in operation for 1980 hours, and 
the power will turn off after 20 hours.

OUT OF LAMP USAGE 
TIME. CHANGE THE 
LAMP!

The lamp has been in operation for over 2000 hours. 
The warning message will display for 30 seconds every 
5 minutes after you turn on the projector and the 
power will turn off automatically after 10 minutes.