Important Safety Instructions

3

Safety Instructions (Continued)

7.

Do not block the ventilation holes. 

- Do not place this unit on a blanket, 

bedding or any other soft surface.

- Do not cover this unit with a cloth or any 

other item. 

- Do not place inflammables near the 

projector.   

If the ventilation holes are seriously 

obstructed, overheating inside the unit 

may result in a fire.

8.

Do not place this unit in any of the 
following environments. 

- Space that is poorly ventilated or 

confined. Allow at least 50 cm clearance 

from walls and free flow of air around 

the projector.

- Locations where temperatures may 

become excessively high, such as the 

inside of a car with all windows rolled 

up.

- Locations where excessive humidity, 

dust, or cigarette smoke may 

contaminate optical components, 

shortening the projector’s lifespan and 

darkening the image.

- Locations near fire alarms
- Locations with an ambient temperature 

above 35°C / 95°F  

9.

Always place the unit on a level, hori-
zontal surface during operation.

- Do not use if tilted at an angle of more 

than 10 degrees left to right, nor at angle 

of more than 15 degrees front to back. 

Using the unit when it is not fully 

horizontal may cause a malfunction of, 

or damage to, the lamp.  

10.

Do not stand the unit on end verti-
cally.  

Doing so may cause the unit to fall over, 

causing injury or resulting in damage to 

the unit.

11.

Do not step on this unit or place any  
objects upon it.  

Besides probable physical damage to the 

unit, doing so may result in accidents 

and possible injury.