Important safety instructions

7

Safety Instructions (Continued)

12.

Do not place this projector in any of the 
following environments. 

- Space that is poorly ventilated or confined. 

Allow at least 50 cm clearance from walls 
and free flow of air around the projector. 

- Locations where temperatures may 

become excessively high, such as the 
inside of a car with all windows rolled up.

- Locations where excessive humidity, dust, 

or cigarette smoke may contaminate 
optical components, shortening the 
projector's life span and darkening the 
image.

- Locations near fire alarms
- Locations with an ambient temperature 

above 40°C/104°F

- Locations where the altitudes are higher 

than 10000 feet.

13.

Do not block the ventilation holes. 

- Do not place the projector on a blanket, 

bedding or any other soft surface. 

- Do not cover the projector with a cloth or 

any other item. 

- Do not place inflammables near the 

projector.   

If the ventilation holes are seriously 
obstructed, overheating inside the 
projector may result in a fire.

14.

Always place the projector on a level, 
horizontal surface during operation.

- Do not use if tilted at an angle of more 

than 10 degrees left to right, nor at angle 
of more than 15 degrees front to back. 
Using the projector when it is not fully 
horizontal may cause a malfunction of, or 
damage to, the lamp. 

10000 
feet