Illustration 10*
Vacuuming with accessories
(insert the grip or the suction pipe, depending on
requirements).
a)
Corner nozzle
To vacuum in corners and joins.
b)
Upholstery nozzle
To vacuum upholstered furniture, curtains,
mattresses etc..
c)
Furniture brush
To vacuum window frames, cupboards, sections etc..
Illustration 11
When taking brief vacuuming pauses, you can use the
parking aid on the back of the appliance. Push the
hook on the floor nozzle in to the recess on the back
of the appliance.
Illustrations 12 + 13
When vacuuming, e.g. stairs, the appliance can also
be carried using the two grips.
After work
Illustration 14
Pull out the mains plug.
Pull briefly on the mains cable and then let go (the
cable rolls up automatically).
Illustration 15
To store / transport the appliance, you can use the
storing aid on the underside of the appliance. Stand
the appliance up straight. Push the hook on the floor
nozzle in to the recess on the underside of the
appliance.
Changing the filter
Replace the dust bag
Illustration 16
The filter change display on the lid turns yellow.
Illustration 17 + 18
Open the lid and take it off by moving the locking
lever in the direction of the arrow.
Illustration 19
Close and remove the dust bag by pulling on the
cover clip.
Illustration 20
Insert he new dust bag in the holding fixture up until
the stop.
Illustration 21
When closing the lid, ensure that both of the locking
keys on the lid fit properly into the recesses on the
underside of the appliance.
After closing the cover, this audibly clicks into place
when pushed in the direction of the arrow.
!
After vacuuming fine dust particles (like for example,
plaster, cement etc.), clean the motor filter and, if
necessary, replace the microfilter.
Changing the microfilter
When should I change the filter? Each time a new
paper filter pack is fitted.
Illustration 22
Take off the covering by pushing the locking key in
the direction of the arrow.
Remove the microfilter.
Push the new microfilter on to the retaining key of
the covering - text can be seen.
Close the covering.
Cleaning the motor filter
Illustration 23
Open the cover.
Unlock and open the filter holder by pressing in the
direction of the arrow.
Illustration 24
Remove the motor protection filter and shake
Illustration 25
Place the motor protection filter in the filter holder
Close the filter holder and engage
Close the cover
Maintenance
Before the appliance is cleaned, ensure that it has
been switched off and the mains plug removed.
Vacuum cleaners and accessories made of plastic
can be cleaned using a general commercial plastic
cleaner.
!
Do not use scouring agents, glass or all-purpose
cleaners.
Never immerse the vacuum cleaner in water!
If necessary, the dust section can be cleaned using
another vacuum cleaner, or simply cleaned out using
a dry dust cloth / dust brush.
Subject to technical change without notice.
8
9000 730 861 A (Innenteil) 02.12.2011 10:15 Uhr Seite 8