43

D-Link DCS-2330L User Manual

Section 3: Configuration

Motion Detection

Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used for 

monitoring. After making any changes, click the 

Save Settings 

button to save your changes.

Enable Video 

Motion:

Sensitivity:

Percentage:

Draw Motion Area:

Erase Motion Area:

Select this box to enable the motion detection 

feature of your camera.

Specifies the measurable difference between two 

sequential images that would indicate motion. Please 

enter a value between 0 and 100.

Specifies the amount of motion in the window being 

monitored that is required to initiate an alert. If this 

is set to 100%, motion is detected within the whole 

window will trigger a snapshot.

Draw the motion detection area by dragging your 

mouse in the window (indicated by the red square).

To erase a motion detection area, simply click on the 

red square that you wish to remove.

Right clicking on the camera image brings up the 

following menu options:

Select All:

 Draws a motion detection area over 

the entire screen.

Clear All:

 Clears any motion detection areas that 

have been drawn.

Restore:

 Restores the previously specified motion 

detection areas.