46

D-Link DCS-2330L User Manual

Section 3: Configuration

Event Setup

In a typical application, when motion is detected, the DCS-2330L sends images to a FTP server or via e-mail as notifications. As shown in the 

illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is 

triggered, a specified action will be performed. You can configure the Network Camera to send snapshots or videos to your e-mail address or FTP 

site.

ex. 

Motion detection, 

Periodically, Digital input, 

System reboot

Event Condition

ex. 

Snapshot, Video Clips

ex. 

Email, FTP

Media

(what to send)

Server

(where to send)

Action

To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action shall be 

performed when a trigger is activated.