55

D-Link DCS-2330L User Manual

Section 3: Configuration

Here you can configure the ICR and IR settings. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity in low light 

environments.

Automatic:

Day Mode:

Night Mode:

Schedule Mode:

IR Light Control:

Off:

On:

Sync:

Schedule:

The Day/Night mode is set automatically. Generally, 

the camera uses Day mode and switches to Night 

mode when needed.

Day mode enables the IR Cut Filter.

Night mode disables the IR Cut Filter.

Set up the Day/Night mode using a schedule. The 

camera will enter Day mode at the starting time and 

return to Night mode at the ending time.

The camera can enable or disable the IR (infrared) 

light according to your preferences. This setting 

provides additional controls depending on your 

specific application.

The IR light will always be off.

The IR light will always be on.

The IR light will turn on when the ICR sensor is on.

The IR light will turn on or off according to the 

schedule that you specify below.

Advanced

ICR and IR