See
"Testing Fax line connection"
.
The printer is monitoring line condition while it is
receiving or sending a fax job. If an error occurs during the
transmission and the
ECM Mode
setting is
On
, the printer
may request that the portion of the fax job to be resent.
You should turn off
ECM Mode
only if you are having
trouble sending or receiving a fax job, and you are willing
to accept the errors in the transmission job. Turning off the
setting might be useful when you are trying to send a fax
long distant or receive from long distant (example: other
countries etc.)
The printer might be out of paper and the memory is
full.
The printer cannot
receive faxes from an
extension telephone.
The fax cable might not be securely connected.
The printer dialing mode might be incorrectly set, or
the extension phone might be incorrectly set.
Faxes are not
received automatically.
The
Fax
mode should be selected.
Make sure that there is paper in the paper tray.
Check to see if the display shows
Memory Full
.
The Receiving fax
has blank spaces or is
received in poor-quality.
A noisy phone line can cause line errors.
Check your printer by making a copy.
Receiving faxes are
too light.
The printer might be running out of toner while printing a
fax. Under Toner empty conditions, the printer will store the fax
job into memory, as soon as possible, replace the print cartridge,
and then reprint the fax.
Faxes are printed on two
pages instead of one.
The auto reduction setting may be turned
Off
, try enabling
this setting
Receiving Faxes are
not been printed by the
printer
Receive Forward
feature might be turned
Off
, try
enabling this setting. You can set the printer to forward all
incoming faxes to specified e-mail addresses. Please carry out
Line Test
from Op-panel to confirm line status. See
"Testing Fax
line connection"
.
The printer is not
sending fax.
If your printer is on a PBX system, the PBX system
might be generating a dial tone that the printer cannot
detect.
Fax Line might have signal integration issues. Please
carry out
Line Test
from Op-panel to confirm line status.
See
"Testing Fax line connection"
.
No dial tone sound.
Check that the phone line is connected properly.
Please carry out
Line Test
from Op-panel to confirm line
status. See
"Testing Fax line connection"
.
Check that the phone socket in the wall is working by
plugging in another phone.
Fax Line might have signal integration issues. Please
carry out
Line Test
from Op-panel to confirm line status.
See
"Testing Fax line connection"
.
Fax Line might have signal integration issues. Please
carry out
Dial Tone Test
from Op-panel to confirm line
status. See
"Testing Fax line connection"
.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
