Printer Settings
If your printer is connected to the network, you can change the operator panel settings from your Web
browser. If you are a network administrator, you can clone the printer settings of one printer to one or all
printers on the network.
Type your network printer IP address in your Web browser. Choose
Printer Settings
from the topics list,
and then select the printer settings you want to change.
To copy your printer settings to another printer on the network, choose
Copy Printer Settings
from the
topics list, and then type the other printer's IP address.
If you do not know your printer IP address, it is specified on the printer settings page. To print a printer
settings page:
Press
Menu
.
1.
Press
until
Report/List
appears, and then press
.
2.
Printer Setting
is displayed. Press
.
The printer settings page is printed.
3.
Resetting Defaults
After executing this function and rebooting the printer, all the menu parameters, except the parameters for
the network, are reset to their default values.
Press
Menu
.
1.
Press
until
Admin Menu
appears, and then press
.
2.
Press
until
Maintenance
appears, and then press
.
3.
Press
until
Reset Defaults
appears, and then press
.
4.
The
Are you sure?
message appears on the operator panel. Press
.
5.
Turn off the printer, and then on again to apply the settings.
6.
Initializing NVRAM for Network Settings
You can initialize the IP address and network-related settings by initializing NVRAM for Network settings.
Press
Menu
.
1.
2.
3.