![background image](/i/dell/155225/dell-3110cn/h/dell-3110cn-266.png)
a.
Right-click
Wireless Network Connection
and select
Properties
.
b.
Select
Wireless Network
tab.
c.
Click
Advanced
.
d.
Do either of the following:
e.
When wireless ad-hoc mode is set to the printer:
Select
Computer to Computer (ad hoc) networks only
and close the
Advanced
dialog box.
When wireless infrastructure mode is set to the printer:
Select
Access point (Infrastructure) networks only
and close the
Advanced
dialog box.
Select the setting that you send to the printer in the list in
Preferred Network
group.
f.
Click
Move up
to move the setting to the top of the list.
g.
Click
OK
to close the
Property
dialog box.
h.
NOTE:
When your operating system is earlier than Windows 2000, create settings according to
the manual of the wireless setting tool provided by your wireless device manufacturer.
For Windows Vista:
Open
Control Panel
.
a.
Select
Network and Internet
.
b.
Select
Network and Sharing Center.
c.
Select
Connect to a network
.
d.
Select the original setting from the network items listed in
Connect to a network,
and then
click
Connect
.
e.
Scene 2. Construct new wireless network environment for both computer
and printer (When wireless setting needs to be set to your computer)
For DHCP network:
Create wireless setting of your computer following the steps below.
1.
NOTE:
If your computer provides a wireless LAN adapter tool, change the wireless settings using this
tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.
For Windows XP and Windows Server 2003:
Select
Network Connections
from Control Panel.
a.
b.