![background image](/i/dell/155225/dell-3110cn/h/dell-3110cn-269.png)
i.
j.
NOTE:
WhenWhen your operating system is earlier than Windows 2000, create settings
according to the manual of the wireless setting tool provided by your wireless device
manufacturer.
For Windows Vista:
Open
Control Panel
.
a.
Select
Network and Internet
.
b.
Select
Network and Sharing Center
.
c.
Select
Connect to a network
.
d.
Select the setting you send to the printer from the network items listed in
Connect to a
network
.
e.
Select
Connect Anyway
in the warning dialog box indication indicating you are entering an
unsecured area.
f.
Click
Close
in the dialog box after confirming the connection is a success.
g.
For Fixed IP network:
Create wireless setting of your computer following the steps below.
1.
NOTE:
If your computer provides a wireless LAN adapter tool, change the wireless settings using this
tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.
For Windows XP and Windows Server 2003:
Select
Network Connections
from Control Panel.
a.
Right-click
Wireless Network Connection
and select
Properties
.
b.
Select the
Wireless Networks
tab.
c.
Make sure the check box for
Use Windows to configure my wireless network settings
is
checked.
d.
NOTE:
Be sure to write down the current wireless computer settings in steps d and f so that you
can restore them later.
Click the
Advanced
button.
e.
Select
Computer to Computer (ad hoc) networks only
and close the
Advanced
dialog box.
f.
g.
h.