![background image](/i/dell/154781/dell-c3760dn-c3760n/h/dell-c3760dn-c3760n-383.png)
3
Action
Yes
No
Adjust the transfer bias.
The task is complete.
Contact Dell.
a
On the operator panel, press the
(Menu)
button and select
Admin Settings
→
Maintenance
→
Adjust Transfer
Belt Unit
.
b
Select
K Offset
or
YMC Offset
, and then decrease the value.
c
Launch the
Tool Box
, and click
Chart Print
on the
Diagnosis
tab.
d
Click
Ghost Configuration Chart
.
The Ghost Configuration Chart is printed.
Does this solve your problem?
Light-induced fatigue
Action
Yes
No
1
Check the light fatigue pattern using the Pitch Configuration Chart.
a
Launch the
Tool Box
, and click
Chart Print
on the
Diagnosis
tab.
b
Click
Pitch Configuration Chart
.
Go to action 2.
Contact Dell.
The Pitch Configuration Chart is printed.
Does the pattern on the output match with that on the Pitch
Configuration Chart?
2
Replace the drum cartridges. See "Replacing the Drum Cartridges."
The task is complete.
Contact Dell.
Does this solve your problem?
Troubleshooting Guide
381