90
Saving a User's Logo
You can record the image that is currently being projected as a user's logo.
PROCEDURE
Project the image that you would like to use as a
user's logo, and then press the [Menu] button.
Select the "User’s Logo" menu, and then press the
[Enter] button.
Select "Yes" in the sub-menu, then press the [Enter]
button.
TIP
When a user's logo is recorded, the previous user's logo will be
erased.
1
Remote Control
2
TIP
• If the "User’s Logo Protect" function of "Password Protect" is set to
"ON", a message is displayed and the user's logo can not be
recorded. To record a user's logo, set "User’s Logo Protect" to
"OFF" first.
• If keystone correction or E-Zoom have been carried out, they will be
cancelled when the "User’s Logo" menu is selected.
3
TIP
When you press the [Enter] button, the images will be displayed at the
original image signal resolution, so that if you are projecting images
that have a resolution that is different from the number of pixels on
the projector's panel, and if you are projecting video images, the
display size will change.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
