15

GB

4. Initial Operation 

Before using for the first time, the battery must be fully charged.
Charging time (for uncharged battery) approx. 3 hrs.

The lithium-ion battery can be charged in any state of charge, 
and the charging process can be interrupted at any time without
harming the battery (no memory effect). 

WARNING !

A

Overvoltage damages batteries and the battery 
charger.

V

Ensure the correct mains voltage. 

1.  Press the locking buttons in

0

and remove the battery

A

from

the upper part of the handle

B

. 

2. Plug the plug of the charger cable

C

into the battery

A

. 

3.  Plug battery charger 

D

into a mains socket. 

The charging indicator lamp 

E

on the battery charger lights 

up red. The battery is being charged. 

When the charging indicator lamp 

E

lights up green, the battery

is fully charged. 

4.  First remove the charging cable from the charging socket and

then unplug the battery charger from the mains socket. 

5. Push the battery 

A

down onto the upper part of the handle 

B

. 

Avoid exhaustive discharge : 

Do not wait until the blade comes to an absolute stop (battery
totally discharged) as this shortens the battery life. 

v 

If the output of the trimmer decreases noticeably, charge 
the battery. 

If the battery has been totally discharged, the LED will flash at
the start of charging. If the LED is still flashing after an hour, a
fault has occurred (see 8. Troubleshooting). 

5. Operation 

Risk of injury if the Turbotrimmer does not switch off when
you release the start button. 

V

Never bypass the safety devices (by binding the start 
button to the handle, for example). 

RISK OF INJURY !

Charging the battery : 

0

A

A

E

B

C

D