Инструкция для GMC ACADIA DENALI (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (49,1)

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-6014315) - 2014 - CRC - 4/12/13

Instruments and Controls

5-49

To select a setting, press the set/
reset button while the desired
setting is displayed on the DIC.

EASY EXIT SEAT

If your vehicle has this feature, it
allows you to select your preference
for the automatic easy exit seat
feature. See

Memory Seats on

page 3-7

Press the customization button until
EASY EXIT SEAT appears on the
DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
customization button to scroll
through the following settings:

OFF (default):

No automatic seat

exit recall will occur.

ON:

The driver seat will move back

when the key is removed from the
ignition. The steering column will
also move up and forward on
vehicles with the power tilt and
telescopic steering feature. See

Steering Wheel Adjustment on
page 5-2

The automatic easy exit seat
movement will only occur one time
after the key is removed from the
ignition. If the automatic movement
has already occurred, and you put
the key back in the ignition and
remove it again, the seat and
steering column will stay in the
original exit position, unless a
memory recall took place prior to
removing the key again.

NO CHANGE:

No change will be

made to this feature. The current
setting will remain.

To select a setting, press the set/
reset button while the desired
setting is displayed on the DIC.

MEMORY SEAT RECALL

If your vehicle has this feature, it
allows you to select your preference
for the remote memory seat recall
feature. See

Memory Seats on

page 3-7

Press the customization button until
MEMORY SEAT RECALL appears
on the DIC display. Press the set/
reset button once to access the
settings for this feature. Then press
the customization button to scroll
through the following settings:

OFF (default):

No remote memory

seat recall will occur.

ON:

The driver seat and outside

mirrors will automatically move to
the stored driving position when the
unlock button on the Remote
Keyless Entry (RKE) transmitter is
pressed. The steering column will
also move on vehicles with the
power tilt and telescopic steering
feature. See

Steering Wheel

Adjustment on page 5-2

. See

“

Memory Remote Recall

”

under

Memory Seats on page 3-7

for

information on matching transmitters
to driver positions.

NO CHANGE:

No change will be