Инструкция для GMC ACADIA DENALI (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (20,1)

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-6014315) - 2014 - CRC - 4/12/13

9-20

Driving and Operating

Leaving the Vehicle with the
Engine Running

{

Warning

It can be dangerous to leave the
vehicle with the engine running.
It could overheat and catch fire.

It is dangerous to get out of the
vehicle if the shift lever is not fully
in P (Park) with the parking brake
firmly set. The vehicle can roll.

Do not leave the vehicle when the
engine is running. If you have left
the engine running, the vehicle
can move suddenly. You or others
could be injured. To be sure the
vehicle will not move, even when
you are on fairly level ground,
always set the parking brake and
move the shift lever to P (Park).
See

Shifting Into Park on

page 9-19

. If you are towing a

trailer, see

Driving Characteristics

and Towing Tips on page 9-47

If you have to leave the vehicle with
the engine running, be sure the
vehicle is in P (Park) and the
parking brake is firmly set before
you leave it. After you have moved
the shift lever into P (Park), hold the
regular brake pedal down. Then,
see if you can move the shift lever
away from P (Park) without first
pushing the button.

If you can, it means that the shift
lever was not fully locked in
P (Park).

Torque Lock

Torque lock is when the weight of
the vehicle puts too much force on
the parking pawl in the
transmission. This happens when
parking on a hill and shifting the
transmission into P (Park) is not
done properly and then it is difficult
to shift out of P (Park). To prevent
torque lock, set the parking brake
and then shift into P (Park). To find
out how, see

“

Shifting Into Park

”

listed previously.

If torque lock does occur, your
vehicle may need to be pushed
uphill by another vehicle to relieve
the parking pawl pressure, so you
can shift out of P (Park).

Shifting out of Park

The vehicle is equipped with an
electronic shift lock release system.
The shift lock release is
designed to:

Prevent ignition key removal
unless the shift lever is in
P (Park) with the shift lever
button fully released, and

Prevent movement of the shift
lever out of P (Park), unless the
ignition is in ON/RUN or ACC/
ACCESSORY and the regular
brake pedal is applied.

The shift lock release is always
functional except in the case of an
uncharged or low voltage (less than
9-volt) battery.