Инструкция для GMC ACADIA DENALI (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (30,1)

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-6014315) - 2014 - CRC - 4/12/13

9-30

Driving and Operating

comes on and stays on:

1. Stop the vehicle.

2. Turn the engine off and wait

15 seconds.

3. Start the engine.

Drive the vehicle. If

comes on

and stays on, the vehicle may need
more time to diagnose the problem.
If the condition persists, see your
dealer.

Turning the Systems Off
and On

The button for TCS and StabiliTrak
is on the center stack.

{

Caution

Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.

To turn off TCS and StabiliTrak,
press and release the

button. The

appropriate message displays in the
DIC. To turn TCS and StabiliTrak on
again, press and release the

button. The appropriate message
displays in the DIC. See

Ride

Control System Messages on
page 5-40

If TCS is limiting wheel spin when
the

button is pressed, the system

will not turn off until the wheels stop
spinning.

Adding accessories can affect the
vehicle performance. See

Accessories and Modifications on
page 10-2

Cruise Control

With cruise control, a speed of
about 40 km/h (25 mph) or more can
be maintained without keeping your
foot on the accelerator. Cruise
control does not work at speeds
below about 40 km/h (25 mph).

When the brakes are applied, the
cruise control is disengaged.

{

Warning

Cruise control can be dangerous
where you cannot drive safely at
a steady speed. Do not use the
cruise control on winding roads or
in heavy traffic.

Cruise control can be dangerous
on slippery roads. On such roads,
fast changes in tire traction can
cause excessive wheel slip, and
you could lose control. Do not use
cruise control on slippery roads.