Инструкция для GMC SIERRA 2500HD Denali (2015)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (51,1)

GMC Sierra Denali Owner Manual (GMNA Localizing-U.S/Canada/Mexico-

7299750) - 2015 - crc - 6/9/14

Seats and Restraints

3-51

7. Before placing a child in the

child restraint, make sure it is
securely held in place. To check,
grasp the child restraint at the
safety belt path and attempt to
move it side to side and back
and forth. When the child
restraint is properly installed,
there should be no more than
2.5 cm (1 in) of movement.

When the passenger sensing
system, if equipped, has turned off
the front outboard passenger frontal
airbag, the off indicator in the
passenger airbag status indicator
should light and stay lit when you
start the vehicle.

If a child restraint has been installed
and the on indicator is lit, see

“

If the

On Indicator Is Lit for a Child
Restraint

”

under

Passenger Sensing

System on page 3-25

for more

information.

To remove the child restraint,
unbuckle the vehicle safety belt and
let it return to the stowed position.
If the top tether is attached to a top
tether anchor, disconnect it.

Heavy-Duty Only

This vehicle has airbags. A rear
seat is a safer place to secure a
forward-facing child restraint. See

Where to Put the Restraint on
page 3-38

Never put a rear-facing child seat in
the front. This is because the risk to
the rear-facing child is so great,
if the airbag deploys.

{

Warning

A child in a rear-facing child
restraint can be seriously injured
or killed if the front outboard
passenger airbag inflates. This is
because the back of the
rear-facing child restraint would
be very close to the inflating

(Continued)

Warning (Continued)

airbag. Always secure a
rear-facing child restraint in a
rear seat.

If the child restraint has the LATCH
system, see

Lower Anchors and

Tethers for Children (LATCH
System) on page 3-39

for how and

where to install the child restraint
using LATCH. If you secure a child
restraint using a safety belt and it
uses a top tether, see

Lower

Anchors and Tethers for Children
(LATCH System) on page 3-39

for

top tether anchor locations.

Do not secure a child seat in a
position without a top tether anchor
if a national or local law requires
that the top tether be anchored, or if
the instructions that come with the
child restraint say that the top strap
must be anchored.