Инструкция для GMC YUKON XL DENALI (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (27,1)

GMC Yukon/Yukon XL Owner Manual (GMNA-Localizing-U.S./Canada-

6081505) - 2014 - crc - 4/23/13

Instruments and Controls

5-27

(Customization):

Press to

customize the feature settings on
your vehicle. See

Vehicle

Personalization (With DIC Buttons)
on page 5-44

for more information.

(Set/Reset):

Press to set or

reset certain functions and to turn
off or acknowledge messages on
the DIC.

Trip/Fuel Menu Items (With DIC
Buttons)

(Trip/Fuel):

Press to scroll

through the following menu items:

Odometer

Press the trip/fuel button until
ODOMETER displays. This display
shows the distance the vehicle has
been driven in either kilometers (km)
or miles (mi). Pressing the trip
odometer reset stem will also
display the odometer.

To switch between English and
metric measurements, see

“

Units

”

later in this section.

Trip Odometer

Press the trip/fuel button until TRIP
displays. This display shows the
current distance traveled in either
kilometers (km) or miles (mi) since
the last reset for the trip odometer.
Pressing the trip odometer reset
stem will also display the trip
odometer.

The trip odometer can be reset to
zero by pressing the set/reset
button while the trip odometer is
displayed. You can also reset the
trip odometer while it is displayed by
pressing and holding the trip
odometer reset stem.

The trip odometer has a feature
called the retroactive reset. This can
be used to set the trip odometer to
the number of kilometers (miles)
driven since the ignition was last
turned on. This can be used if the
trip odometer is not reset at the
beginning of the trip.

To use the retroactive reset feature,
press and hold the set/reset button
for at least four seconds. The trip

odometer will display the number of
kilometers (km) or miles (mi) driven
since the ignition was last turned on
and the vehicle was moving. Once
the vehicle begins moving, the trip
odometer will accumulate mileage.
For example, if the vehicle was
driven 8 km (5 mi) before it is started
again, and then the retroactive reset
feature is activated, the display will
show 8 km (5 mi). As the vehicle
begins moving, the display will then
increase to 8.2 km (5.1 mi), 8.4 km
(5.2 mi), etc.

Fuel Range

Press the trip/fuel button until FUEL
RANGE displays. This display
shows the approximate number of
remaining kilometers (km) or
miles (mi) the vehicle can be driven
without refueling. The display will
show LOW if the fuel level is low.

The fuel range estimate is based on
an average of the vehicle's fuel
economy over recent driving history
and the amount of fuel remaining in
the fuel tank. This estimate will