Инструкция для GMC YUKON XL DENALI (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (33,1)

GMC Yukon/Yukon XL Owner Manual (GMNA-Localizing-U.S./Canada-

6081505) - 2014 - crc - 4/23/13

Instruments and Controls

5-33

begins moving, the display will then
increase to 8.2 km (5.1 mi), 8.4 km
(5.2 mi), etc.

Transmission Temperature

Press the trip odometer reset stem
until TRANS TEMP displays. This
display shows the temperature of
the automatic transmission fluid in
either degrees Celsius (°C) or
degrees Fahrenheit (°F).

Trailer Gain and Output

On vehicles with the Integrated
Trailer Brake Control (ITBC) system,
the trailer brake display appears in
the DIC. Press the trip odometer
reset stem until TRAILER GAIN and
OUTPUT display.

TRAILER GAIN shows the trailer
gain setting. This setting can be
adjusted from 0.0 to 10.0 with either
a trailer connected or disconnected.
To adjust this setting, see

“

Integrated Trailer Brake Control

System

”

under

Towing Equipment

on page 9-67

for more information.

OUTPUT shows the power output to
the trailer anytime a trailer with
electric brakes is connected. Output
is displayed in 0 to 10 bars. Dashes
may appear in the OUTPUT display.
See

“

Integrated Trailer Brake

Control System

”

under

Towing

Equipment on page 9-67

for more

information.

Speedometer

The speedometer shows how fast
the vehicle is moving in either
kilometers per hour (km/h) or miles
per hour (mph). The speedometer
cannot be reset.

Compass Zone Setting

This display allows for setting the
compass zone. See

Compass on

page 5-5

for more information.

Compass Recalibration

This display allows for calibrating
the compass. See

Compass on

page 5-5

for more information.

Oil Life

To access this display, the vehicle
must be in P (Park). Press the trip
odometer reset stem until OIL LIFE
REMAINING displays. This display
shows an estimate of the oil's
remaining useful life. If you see
99% OIL LIFE REMAINING on the
display, that means 99% of the
current oil life remains. The engine
oil life system will alert you to
change the oil on a schedule
consistent with your driving
conditions.

When the remaining oil life is low,
the CHANGE ENGINE OIL SOON
message will appear on the display.
See

“

CHANGE ENGINE OIL SOON

”

under

Engine Oil Messages on

page 5-37

. You should change the

oil as soon as you can. See

Engine

Oil on page 10-6

. In addition to the