Инструкция для GMC YUKON XL DENALI (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (37,1)

GMC Yukon/Yukon XL Owner Manual (GMNA-Localizing-U.S./Canada-

6081505) - 2014 - crc - 4/23/13

Instruments and Controls

5-37

ENGINE OVERHEATED STOP
ENGINE

This message displays and a chime
sounds if the engine cooling system
reaches unsafe temperatures for
operation. Stop and turn off the
vehicle as soon as it is safe to do so
to avoid severe damage. This
message clears when the engine
has cooled to a safe operating
temperature.

Engine Oil Messages

CHANGE ENGINE OIL SOON

This message displays when the
engine oil needs to be changed.
When you change the engine oil, be
sure to reset the CHANGE ENGINE
OIL SOON message. See

Engine

Oil Life System on page 10-9

for

information on how to reset the
message. See

Engine Oil on

page 10-6

and

Maintenance

Schedule on page 11-2

for more

information.

ENGINE OIL HOT IDLE
ENGINE

This message displays when the
engine oil becomes hotter than the
normal operating temperature. Stop
and allow the vehicle to idle until it
cools down. See

Engine Coolant

Temperature Gauge on page 5-14

OIL PRESSURE LOW STOP
ENGINE

Notice:

If you drive the vehicle

while the engine oil pressure is
low, severe engine damage may
occur. If a low oil pressure
warning appears on the Driver
Information Center (DIC), stop the
vehicle as soon as possible. Do
not drive the vehicle until the
cause of the low oil pressure is
corrected. See

Engine Oil on

page 10-6

for more information.

This message displays if low oil
pressure levels occur. Stop the
vehicle as soon as safely possible
and do not operate it until the cause
of the low oil pressure has been

corrected. Check the oil as soon as
possible and have the vehicle
serviced by your dealer. See

Engine

Oil on page 10-6

Engine Power Messages

ENGINE POWER IS REDUCED

This message displays and a chime
sounds when the cooling system
temperature gets too hot and the
engine further enters the engine
coolant protection mode. See

Engine Overheating on page 10-18

for further information.

This message also displays when
the engine power is reduced.
Reduced engine power can affect
the vehicle's ability to accelerate.
If this message is on, but there is no
reduction in performance, proceed
to your destination. The
performance may be reduced the
next time the vehicle is driven. The
vehicle may be driven at a reduced
speed while this message is on, but
acceleration and speed may be
reduced. Anytime this message