8

GB

Start-up and use

WARNING!

The oven is provided with a stop system to extract the racks and 

prevent them from coming out of the 

oven (1).As shown in the drawing, 

to extract them completely, simply 

lift the racks, holding them on the 

front part, and pull (2).

!

 The first time you use your 

appliance, heat the empty oven 

with its door closed at its maximum temperature for at least half an hour. Make 

sure that the room is well ventilated before switching the oven off and opening 

the oven door. The appliance may emit a slightly unpleasant odour caused by 

protective substances used during the manufacturing process burning away.

!

 To make the setting process easier, press and hold the “ ” and “ ” buttons 

to scroll through the numbers on the display rapidly.

!

 Each setting will automatically be stored in the appliance memory after 10 

seconds.

!

 The touch controls cannot be activated if the user is wearing gloves.

!

 In order to optimise the cooking performance, when starting the selected 

function, product settings will be applied that could cause a delayed start of 

the fan and heating elements.

Some models are equipped with a system of hinges which allows the door to 

close slowly, without the user having to follow the movement through with his/

her hand. To use the system correctly, before closing the door:

•  Open the door fully.

•  Do not force the closing movement manually.

Control panel lock

!

 The control panel can be locked while the oven is off, once cooking has 

started or finished and during programming.

To lock the oven controls, press and hold the 

 button for at least 2 

seconds. A buzzer will sound and the TEMPERATURE display shows the 

key symbol “O—n”. The 

 icon will light up to indicate lock activation.

To deactivate the lock, press and hold the 

 button again for at least 2 

seconds.

Setting the clock

!

 The clock can only be set when the oven is switched off. If the oven is in 

standby mode, pressing the 

 button once will display the current time 

setting. Press it again to set the time.
After connection to the power supply network or after 
a blackout, the 

 button and the digits on the TIME display will flash for 

10 seconds.

To set the clock:
1. Press the 

 button.

2. Adjust the hour figure using the “

” and “ ” buttons.

3. Once you have reached the correct hour value, press the 

 button.

4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the clock. If the 

 icon 

flashes on the display, this indicates that the clock has not been set correctly.

Setting the minute minder

!

 The minute minder may be set regardless of whether the oven is switched 

on or off. It does not switch the oven on or off.

When the set time has elapsed, the timer emits a buzzer that will automatically 

stop after 30 seconds or when any active button on the control panel is 

pressed.

To adjust the timer proceed as follows:
1. Press button 

.

2. Set the desired time using buttons “ ” and “ ”.
3. Once you have reached the desired value, press the 

 button again.

The lit 

 symbol will remind you that the minute minder is on.

To cancel the minute minder, press the 

 button and use the “ ” and “

” buttons to set the time to 00:00. Press button 

 again.

The 

 icon will switch off to indicate that the minute minder has been 

disabled.

Starting the oven

1. Switch the control panel on by pressing the 

 button. The appliance 

buzzer sounds three times (ascending) and all buttons light up in sequence.

2. Press the button corresponding to the desired cooking mode. The 

TEMPERATURE display shows:

- the temperature associated with the mode, if programming manually;

- “Auto”, if programming is automatic.

The TIME display shows:

- the current time, if programming manually;

- the duration, if programming is automatic.
3. Press the 

 button to begin cooking.

4. The oven will begin its preheating phase, the preheating indicators will light 

up as the temperature rises.

5. When the preheating process has finished, a buzzer sounds and all the 

preheating indicator lights show that this stage has been completed: the food 

can then be placed in the oven.

6. During cooking it is always possible to:

- change the temperature by pressing the 

 button, followed by the “ ” 

and “ ”

 buttons (manual modes only);

- set the duration of a cooking mode (see Cooking Modes);

- press the 

 button to stop cooking. In this case the appliance stores the 

temperature modified previously in its memory (manual modes only);

- switch off the oven by pressing the 

 button for 3 seconds.

7. If a blackout occurs while the oven is already in operation, an automatic 

system within the appliance will reactivate the cooking mode from the point at 

which it was interrupted, provided that the temperature has not dropped below 

a certain level. Programmed cooking modes which have not yet started will 

not be restored and must be reprogrammed (for example: a cooking mode 

has been programmed to start at 20:30. At 19:30 a blackout occurs. When the 

power supply is restored, the mode will have to be reprogrammed).

!

 There is no preheating stage for the GRILL mode.

!

 Never put objects directly on the bottom of the oven; this will prevent the 

enamel coating from being damaged.

!

 Always place cookware on the rack(s) provided.