Internal Storage
Devices

One of the following
depending on Model

Optical Drives

Optional: DVD-ROM, DVD-RW

Hard Drives

None ship standard

Hard Drive Bays

8 SFF drive bays total with Optical Bay
4 LFF drive bays total with Optical bay

NOTE: 

HP ProLiant DL160 Gen9 server offers both SFF and LFF

versions in Configure-to-Order Models. The Optical Drive bay is
available with both models.

NOTE: 

Drive cage changes are not supported.

NOTE: 

All Pre-configured Models come populated with some hard drive

blanks installed. Should the customer need additional hard drive blanks,
they can order more using either P/N 666987-B21: HP SFF Gen9 Hard
Drive Blank Kit or P/N 666986-B21: HP LFF Gen9 Hard Drive Blank Kit.
These part numbers for single HDD blanks below are also provided
should the customer require replacement HDD blanks for their server.

Maximum Internal
Storage

One of the following
depending on Model

CAPACITY

CONFIGURATION

Hot Plug SFF SAS

9.6TB

8 x 1.2TB

Hot Plug SFF SATA

8.0TB

8 x 1TB

Hot Plug LFF SAS

24.0TB

4 x 6TB

Hot Plug LFF SATA

24.0TB

4 x 6TB

Hot Plug SFF SAS SSD

12.8TB

8 x 1.6TB

Hot Plug SFF SATA SSD

12.8TB

8 x 1.6TB

Hot Plug LFF SATA SSD

6.4TB

4 x 1.6TB

Power Supply

One of the following
depending on Model

HP 550W FIO Power Supply

HP Entry-Level Power Supplies provide lower-cost options for customers trying to balance their
need for enterprise class efficiency and reliability while maintaining lowest possible hardware
costs. All Entry-Level power supply options have been designed specifically for HP ProLiant Gen9
Essential Series servers.

The HP 550W FIO Power Supply is the standard, non-redundant AC power supply option for
most HP ProLiant Gen9 Essential servers. It features Silver-level (89%) certified power efficiency
with a set of features optimized for the Gen9 Essential-series rack and tower servers.

All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This
jumper cord is also included with each standard AC power supply option kit. If a different power
cord is required, please check the ProLiant Power Cables web page.

To review the power requirements for your selected system, please use the HP Power Advisor
Tool located at 

www.hp.com/go/hppoweradvisor

.

Power specifications and technical content for all HP Server power supplies can be found at

www.hp.com/go/proliant/powersupply

.

QuickSpecs

HP ProLiant DL160 Generation9 (Gen9)

Standard Features

DA - 15031   Worldwide QuickSpecs — Version 1 — 9.9.2014

Page  5