System Fans
One of the following
depending on Model
Non-redundant
Redundant
1P model
3 fans
4 fans
Non-redundant
Redundant
2P model
6 fans
7 fans
NOTE:
Redundant fan option kit (PN: 725587-B21) can be bought separately if redundancy is required with 1P or 2P
configurations.
NOTE:
Additional fans required with 2P configurations are included in "-B21" processor option kits
.
Interfaces
Video
1 (Vaux Support)
HP iLO Remote Management Network
Port
1 GbE (Optional)
USB
4 USB ports (standard); 1 (optional)
Front: 1xUSB 2.0 std; 1xUSB3.0 optional (with 8SFF
models only)
Rear: 2xUSB 3.0
Internal: 1x USB 3.0
SD Slot
1 Micro SD
NOTE:
The SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD
card into the SD slot while the server is powered.
LOM Network Ports
2 x 1GbE ports
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware
NOTE:
For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and
latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport
and our driver download page
http://www.hp.com/support/DL160Gen9
Upgradeability
One of the following
depending on Model
Upgradeable to two processors (24 cores)
Up to 16 DIMM slots available
NOTE:
To take advantage of all 16 DIMMs, second processor must be installed
FlexibleLOM slot for 1Gigabit or 10 Gigabit Ethernet or QDR/FDR InfiniBand networking options
NOTE:
FlexibleLOM support will be included in December 2014
Optional 2nd CPU riser slot (x16, low profile)
NOTE:
2nd CPU must be installed if this riser is configured.
Up to 8 SFF Hard Drive Bays; or 4 LFF Hard Drive Bays
Redundant Power Supply
NOTE:
Redundant Power Supply will be available in December 2014.
Redundant Fan
Optical Drive Bay (8 SFF/4 LFF)
QuickSpecs
HP ProLiant DL160 Generation9 (Gen9)
Standard Features
DA - 15031 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 6