![background image](/i/hp/126054/hp-proliant-dl360-hpm-gen9-rack1u-2xxeon-e5-2670v3-12c-23ghz30mb-4x16gbr4d/h/hp-proliant-dl360-hpm-gen9-rack1u-2xxeon-e5-2670v3-12c-23ghz30mb-4x16gbr4d-005.png)
Internal Storage
Devices
One of the following
depending on Model
Optical Drives
8 SFF with optional Universal Media bay
4 SFF with optional Universal Media bay
Hard Drives
None ship standard
Hard Drive Bays
8 SFF with optional Universal Media bay
4 LFF
8 SFF with optional HP DL360 Gen9 2 SFF SAS/SATA kit
NOTE:
HP ProLiant DL360 Series servers offer both SFF, and LFF
versions in CTO.
NOTE:
All Pre-configured Models come populated with some hard drive
blanks installed. Should the customer need additional hard drive blanks,
they can order more using either P/N 666987-B21: HP SFF Gen8 Hard
Drive Blank Kit or P/N 666986-B21: HP LFF Gen8 Hard Drive Blank Kit.
These part numbers for single HDD blanks below are also provided
should the customer require replacement HDD blanks for their server.
Maximum Internal
Storage
CAPACITY
CONFIGURATION
Hot Plug SFF SAS SSD
8.0TB
10 x 800GB
Hot Plug SFF SATA SSD
4.0TB
10 x 400GB
Hot Plug LFF SATA SSD
3.2TB
4 x 800GB (with optional LFF
drive cage)
Hot Plug SFF SAS
12.0TB
10 x 1.2TB
Hot Plug SFF SATA
10.0TB
10 x 1TB
Hot Plug LFF SAS
12.0TB
4 x 3TB (with optional LFF drive
cage)
Hot Plug LFF SATA
16.0TB
4 x 4TB (with optional LFF drive
cage)
Power Supply
One of the following
depending on Model
HP 500W Flex Slot Platinum Hot Plug Power Supply
HP 800W Flex Slot Platinum Hot Plug Power Supply
HP 1400W Flex Slot Platinum Plus Hot Plug Power Supply
HP Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that
allows for hot plug, tool-less installation into HP ProLiant Gen9 Performance Servers. Flex Slot
power supplies are certified for high-efficiency operation and offer multiple power output options,
allowing users to "right-size" a power supply for specific server configurations. This flexibility
helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in
the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This
jumper cord is also included with each standard AC power supply option kit. If a different power
cord is required, please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HP Power Advisor
Tool located at
www.hp.com/go/hppoweradvisor
.
Power specifications and technical content for all HP Server power supplies can be found at
www.hp.com/go/proliant/powersupply
.
NOTE:
Mixing of power supplies in the same server is not supported. All power supplies must be
of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are
installed, you may receive an error message and/or experience operational issues with your
server.
QuickSpecs
HP ProLiant DL360 Generation9 (Gen9)
Standard Features
DA - 15033 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 5