Industry Standard
Compliance
ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 3.0 Support
Energy Star
ASHRAE A3/A4
Graphics
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
HP Server UEFI/Legacy
ROM
HP Server UEFI /Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better
manageability and more secured configuration while interacting with your server at boot time. HP
ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS
Boot Mode.
NOTE:
The UEFI System Utilities function is analogous to the HP ROM-Based Setup Utility
(RBSU) of legacy BIOS. For more information, please visit
http://www.hp.com/go/proliantuefi/docs
.
UEFI enables numerous new capabilities specific to HP ProLiant servers such as:
Secure Boot
Operating system specific functionality
Support for > 2.2 TB (using GPT) boot drives
USB 3.0 Stack
Embedded UEFI Shell
Mass Configuration Deployment Tool using HP RESTful API.
PXE boot support for IPv6 networks
Boot support for option cards that only support a UEFI option ROM
For more information please visit
http://www.hp.com/go/proliant/uefi
NOTE:
For UEFI Boot Mode, boot environment and OS image installations should be configured
properly to support UEFI.
NOTE:
HP UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy
mode in the factory.
Form Factor
One of the following
depending on Model
1U Rack form factor
8 SFF Drive Bay Version and 8 +2 SFF Drive Bay Version:
1.7" (4.32cm) Height x 17.11" (43.47cm) Width x 27.5" (69.85cm) Length
4 LFF Drive Bay Version:
1.7" (4.32cm) Height x 17.11" (43.47cm) Width x 29.5" (74.67cm) Length
QuickSpecs
HP ProLiant DL360 Generation9 (Gen9)
Standard Features
DA - 15033 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 7