EN

8

*

 Only available in selected models.

Adjusting the height of the upper rack

In order to make it easier to arrange the crockery, the upper 
rack may be moved to a higher or lower position.

The height of the upper rack should be adjusted WHEN THE 
RACK IS EMPTY.
NEVER raise or lower the rack on one side only.

If the rack is equipped with a 

Lift-Up

device

*

 (see figure)

, lift 

it up by holding its sides. To restore the lower position, press 
the levers (

A

) at the sides of the rack and follow the rack down.

Unsuitable crockery

•  Wooden crockery and cutlery.
•  Delicate decorated glasses, artistic handicraft and antique 

crockery. Their decorations are not resistant.

•  Parts  in  synthetic  material  which  do  not  withstand  high 

temperatures.

•  Copper and tin crockery.
•  Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces 

can change and fade during the washing process. Some types of 

glass (e.g. crystal objects) can become opaque after a number 

of wash cycles too. 

Damage to glass and crockery

Caused by:

•  Type of glass and glass production process.
•  Chemical composition of detergent.
•  Water temperature of rinse cycle.

Tips:

•  Only  use  glasses  and  porcelain  guaranteed  by  the  

manufacturer as dishwasher safe.

•  Use a delicate detergent suitable for crockery.
•  Collect glasses and cutlery from the dishwasher as soon as  

the wash cycle is over.

The upper rack can be adjusted for height based on 

requirements:  high  position  to  place  bulky  crockery  in  the 

lower rack and low position to make the most of the tip-up 

compartments/sectors  by creating more space upwards.

Tip-up compartments with adjustable position

The side tip-up compartments can be positioned at three 

different heights to optimize the arrangement of crockery inside 

the rack.

Wine glasses can be placed safely in the tip-up compartments 

by inserting the stem of each glass into the corresponding slots.

Before loading the tray, 
make sure the supports are 
properly coupled to the up-
per rack  

(see Figure).

Cutlery tray

*

Some dishwasher models are fitted with a sliding tray which 
can be used to hold serving utensils or small cups. For optimum 
washing performance avoid positioning bulky crockery directly 
below the tray. The cutlery tray can be removed 

(see Figure).