![background image](/i/infiniti/152149/infiniti-g35-sedan-2008/h/infiniti-g35-sedan-2008-110.png)
Instrument brightness control
The instrument brightness control switch can be
operated when the ignition switch is in the ON
position. When the switch is operated, the dot
matrix liquid crystal display switches to the
brightness adjustment mode.
Push the upper switch
s
A
to brighten the
instrument panel lights. The bar
s
1
moves to
the + side. When reaching the maximum bright-
ness, “MAX” appears on the display
s
2
.
Push the lower switch
s
B
to dim the instrument
panel lights. The bar
s
1
moves to the
2
side.
When reaching the minimum brightness, “MIN”
appears on the display
s
3
. However, “MIN”
does not appear during the nighttime.
The dot matrix liquid crystal display returns to
the normal display under the following condi-
tions:
●
when the instrument brightness control
switch is not operated for more than 5
seconds.
●
when the side or front of the
switch or
switch on the right side of the com-
bination meter panel is pushed.
TURN SIGNAL SWITCH
s
1
Turn signal
Move the lever up or down to signal the turning
direction. When the turn is completed, the turn
signals cancel automatically.
s
2
Lane change signal
To indicate a lane change, move the lever up or
down to the point where lights begin flashing.
SIC3270
SIC3271
2-36
Instruments and controls
w
—
—
07/14/07—pattie
X