![background image](/i/infiniti/151165/infiniti-g37-convertible-2009/h/infiniti-g37-convertible-2009-315.png)
If it is not possible to set the system or the
indicator stays on, it may indicate that the ICC
system is malfunctioning. Although the vehicle
is still driveable under normal conditions, have
the vehicle checked at an INFINITI dealer.
Sensor maintenance
The sensor for the ICC system
䊊
A
is located
below the front bumper.
To keep the ICC system operating properly, be
sure to observe the following:
●
Always keep the sensor clean. Wipe with a
soft cloth carefully so as not to damage the
sensor.
●
Do not strike or damage the areas around
the sensor. Do not touch or remove the
screw located on the sensor. Doing so could
cause failure or malfunction. If the sensor is
damaged due to an accident, contact an
INFINITI dealer.
●
Do not attach a sticker (including transpar-
ent material) or install an accessory near the
sensor. This could cause failure or malfunc-
tion.
CONVENTIONAL (FIXED SPEED) CRUISE
CONTROL MODE
This mode allows driving at a speed between 25
to 89 MPH (40 to 144 km/h) without keeping
your foot on the accelerator pedal.
Type A
SSD0662
Type B
SSD0663
5-38
Starting and driving
췽
—
—
04/06/09—tbrooks
墍