![background image](/i/infiniti/150233/infiniti-m45-2009/h/infiniti-m45-2009-265.png)
Activating Alternate Command Mode
When the Standard Mode is active, perform the
following steps to switch to the Alternate Com-
mand Mode.
1. Push the
SETTING
button on the instru-
ment panel.
2. Highlight the “Others” key on the display
and then push the
ENTER
button.
3. Highlight the “Voice Recognition” key and
then push the
ENTER
button.
4. Highlight the “Alternate Command Mode”
key and push the
ENTER
button.
5. The confirmation message is displayed on
the screen. Push the “OK” key to activate
the Alternate Command Mode.
Displaying command list
If you are controlling the system by voice
commands for the first time or do not know the
appropriate voice command, perform the fol-
lowing procedure for displaying the voice com-
mand list (available only in Alternate Command
Mode).
1. Push the
INFO
button on the instrument
panel.
2. Highlight the “Others” key using the
INFINITI controller and push the
ENTER
button.
3. Highlight the “Voice Recognition” key us-
ing the INFINITI controller and push the
ENTER
button.
You can skip steps 1 to 3 above if you say
“Help”.
4. Highlight the “Command List” key using
the INFINITI controller and push the
ENTER
button.
SAA1916
SAA2168
SAA1803
Monitor, climate, audio, phone and voice recognition systems
4-111
췽
—
—
05/23/08—pattie
墍