![background image](/i/infiniti/150233/infiniti-m45-2009/h/infiniti-m45-2009-312.png)
MAIN switch to turn off the ICC system and
reset the ICC switch by pushing the MAIN
switch again.)
For details about the VDC system, see “VE-
HICLE DYNAMIC CONTROL (VDC) SYSTEM”
later in this section.
●
When ABS or VDC (including the traction
control system) is operating
●
When driving into a strong light (i.e., sun-
light)
●
When a wheel is slipping (To use the ICC
system, make sure the wheels are no longer
slipping. Push the MAIN switch to turn off
the ICC, and reset the ICC system by pushing
the MAIN switch again.)
1. System set display with vehicle ahead
2. System set display without vehicle ahead
System operation
WARNING
Normally when controlling the distance to a
vehicle ahead, this system automatically accel-
erates or decelerates your vehicle according
tothe speed of the vehicle ahead. Depress the
accelerator to properly accelerate your vehicle
when acceleration is required for a lanechange.
Depress the brake pedal when deceleration is
required to maintain a safe distance to the ve-
hicle ahead due to its sudden braking or if a
vehicle cuts in. Always stay alert when using
the ICC system.
The driver sets the desired vehicle speed based
on the road conditions. The ICC system main-
tains the set vehicle speed, similar to standard
cruise control, as long as no vehicle is detected
in the lane ahead.
The ICC system displays the set speed.
SSD0461
5-36
Starting and driving
췽
—
—
09/03/08—tbrooks
墍