Инструкция для INFINITI QX56 (2010)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Transfer 4LO position indicator (

model)

This indicator illuminates when the 4WD shift
switch is set in the 4LO position with the ignition
switch placed in the ON position.

If the 4WD shift switch is set in the 4LO position
and the indicator blinks, stop the vehicle, drive
slowly forward and the indicator will turn on.

When you shift between 4H and 4LO, stop the
vehicle, move the shift selector to the N (Neutral)
position, then depress and turn the 4WD shift
switch to 4LO or 4H.

The transfer case may be damaged if you shift the
switch while driving.

You cannot move the transfer 4WD shift switch
between 4H and 4LO unless you have first
stopped the vehicle and moved the shift selector
to N (Neutral). Make sure the transfer 4LO posi-
tion indicator illuminates when you shift the 4WD
shift switch to 4LO.

The indicator may blink while shifting from
one drive mode to the other.

Automatic transmission position indicator

When the ignition switch is placed in the ON
position, this indicator shows the selector posi-

tion. See “Driving the vehicle” in the “Starting and
driving” section of this manual.

Cruise

main

switch

indicator

(if

equipped)

This indicator illuminates when the cruise control
main switch is pushed. The indicator turns off
when the main switch is pushed again. When the
cruise main switch indicator illuminates, the
cruise control system is operational.

Cruise set switch indicator

This indicator illuminates while the vehicle speed
is controlled by the cruise control system. If the
indicator blinks while the engine is running, it may
indicate the cruise control system is not function-
ing properly. Have the system checked by an
INFINITI dealer.

Intelligent Cruise Control (ICC) system
main switch indicator (if so equipped)

This indicator is displayed when the Intelligent
Cruise Control (ICC) system main switch is
pushed. When the main switch is pushed again,
the indicator turns off. While the main switch
indicator is displayed, the ICC system is opera-
tional.

Intelligent Cruise Control (ICC) system set
switch indicator (if so equipped)

This indicator is displayed while the vehicle
speed is controlled by the Intelligent Cruise Con-
trol (ICC) system. If the indicator blinks while the
engine is running, it may indicate that the ICC
system is not functioning properly. Have the sys-
tem checked by an INFINITI dealer.

See Intelligent Cruise Control (ICC) system in
the “Starting and driving” section for details.

Parking brake warning

This warning illuminates when the parking brake
is set and the vehicle is driven.

Low fuel warning

This warning illuminates when the fuel level in the
fuel tank is getting low. Refuel as soon as it is
convenient, preferably before the fuel gauge
reaches E (Empty).

There will be a small re-

serve of fuel in the tank when the fuel
gauge needle reaches E (Empty).

Low windshield washer fluid warning

This warning illuminates when the windshield
washer fluid is at a low level. Add windshield
washer fluid as necessary. See “Window washer
fluid” in the “Maintenance and do-it-yourself”
section of this manual.

Instruments and controls

2-19

墌

REVIEW COPY—

2010 Infiniti QX56

(iwz)

Owners Manual

(owners)

—USA_English

(nna)

02/12/09—diane

墍