Инструкция для INFINITI QX56 (2010)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

4WD warning light

Warning light

Comes on or blinks

when:

Comes on

There is a malfunc-
tion in the 4–wheel

drive system

Blinks rapidly

The transfer case
oil temperature is

abnormally high

Blinks slowly

The difference in

wheel rotation is

large

The 4WD warning light is located in the meter.

The 4WD warning light comes on when the igni-
tion switch is placed in the ON position. It turns
off soon after the engine is started.

If any malfunction occurs in the 4WD system
when the ignition switch is ON, the warning light
will either remain illuminated or blink.

If the 4WD warning light comes on, the 4WD
shift indicator light goes out.

High-temperature transfer case oil makes the
warning light blink rapidly (about twice per sec-
ond). If the warning light blinks rapidly during
operation, stop the vehicle in a safe place imme-
diately. Then if the light goes off after a while, you
can continue driving.

A large difference between the diameters of front
and rear wheels will make the warning light blink
slowly (about once per two seconds). Change
the 4WD shift switch into 2WD and do not drive
fast.

CAUTION

●

If the warning light comes on or blinks
slowly during operation or rapidly after
stopping the vehicle for a while, have
your vehicle checked by an INFINITI
dealer as soon as possible.

●

Shifting between 4H and 4LO is not
recommended when the 4WD warning
light turns on.

●

When the warning light comes on, the
2WD mode may be engaged even if the
4WD shift switch is in AUTO or 4H. Be
especially careful when driving. If corre-
sponding parts are malfunctioning, the
4WD mode will not be engaged even if
the 4WD shift switch is shifted.

●

Do not drive the vehicle in the 4H or 4LO
position on dry hard surface roads. Driv-
ing on dry, hard surfaces in 4H or 4LO
may cause unnecessary noise, tire wear
and increased fuel consumption.

If the 4WD warning light turns on when
you are driving on dry hard surface
roads:

– in the AUTO or 4H position, shift the

4WD shift switch to 2WD.

– in the 4LO position, stop the vehicle,

move the automatic transmission
shift selector to the N position with
the brake pedal depressed, and shift
the 4WD shift switch to 2WD.

●

If the warning light is still on after the
above operation, have your vehicle
checked by an INFINITI dealer as soon
as possible.

●

The transfer case may be damaged if
you continue driving with the warning
light blinking.

Starting and driving

5-47

墌