Инструкция для INFINITI QX56 (2010)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Shift lock release

If the battery is discharged, the shift selector may
not be moved from the P (Park) position even with
the brake pedal depressed.

To move the shift selector, release the shift lock.
The shift selector can be moved to N (Neutral).
However, the steering wheel will be locked un-
less the ignition switch is turned to the ON posi-
tion. This allows the vehicle to be moved if the
battery is discharged.

To push the shift lock release, complete the fol-
lowing procedure:

1. Place the ignition switch in the LOCK posi-

tion.

2. Apply the parking brake.

3. Remove the shift lock release cover as

shown.

4. Insert a small screwdriver in the shift lock

release slot and push down.

5. Move the shift selector to the N (Neutral)

position while holding down the shift lock
release.

6. Turn the ignition switch to the ON position to

unlock the steering wheel. Now the vehicle
may be moved to the desired location.

If the shift selector cannot be moved out of P
(Park), have an INFINITI dealer check the auto-
matic transmission system as soon as possible.

WARNING

If the shift selector cannot be moved from
the P (Park) position while the engine is
running and the brake pedal is depressed,
the stop lights may not work. Malfunction-
ing stop lights could cause an accident
injuring yourself and others.

Accelerator downshift
— in D position —

For passing or hill climbing, depress the accel-
erator pedal to the floor. This shifts the transmis-
sion down into a lower gear, depending on the
vehicle speed.

Fail-safe

When the fail-safe operation occurs, please note
that the transmission will be locked in any of the
forward gears according to the condition.

If the vehicle is driven under extreme con-
ditions, such as excessive wheel spinning
and subsequent hard braking, the fail-safe
system may be activated. This will occur
even if all electrical circuits are functioning
properly. In this case, place the ignition
switch in the OFF position and wait for 3
seconds. Then turn the ignition switch back
to the ON position. The vehicle should re-
turn to its normal operating condition. If it
does not return to its normal operating
condition, have an INFINITI dealer check
the transmission and repair it if necessary.

LSD0090

5-16

Starting and driving

墌

REVIEW COPY—

2010 Infiniti QX56

(iwz)

Owners Manual

(owners)

—USA_English

(nna)

02/12/09—diane