6/6
Select feature to configure for:
esc<-
NNNNNNNNNNNN->[
TOTAL DMX CHANNEL
] OK->
You can set the property of the unit here. Press the up or down key or slider 5( The led will flash) to choose and
confirm to get into. See below
：
“
TOTAL DMX CHANNEL
”
confirm and get into menu 13
：
Total channels occupied on dmx: esc<-
NNNNNNNNNNNN -- [ ] OK->
Set the total DMX channels of the unit
。
“
LCD EFFECT LABEL
”
confirm and get into menu 14
：
Enter number of lcd pages: esc<-
NNNNNNNNNNNN -- [ ] OK->
Input the number of pages(1~5) of the unit occupied and then get into menu 26 to set the string of each
channel
：
Enter the string for effects: more<->
------------------------------------------------------------------- P1
Px shows the current page(choosed by confirm key or return key)
，
use the up or down or left or right key to set
the numbers and confirm back to menu 9. Then choose
“
INTERNAL PATCH
”
and confirm back to menu 15
：
--------------------------------------------------------------------<->
[--] -- -- -- -- -- P1
Set the channel of each function of the unit, press GREYKEY1-6 to cancel the setting; get back to menu 10
after setting and choose
“
STAND-BY VALUES
”
then confirm back to menu 16
：
--------------------------------------------------------------------<->
[---] --- --- --- --- --- P1
Set the STAND-BY value of each channel; press the GREYKEY1-6 to cancel. Get back to menu 10 after
setting and choose
“
EFFECT TYPE
”
and confirm get into menu 17
：
--------------------------------------------------------------------<->
[EFF] EFF EFF EFF EFF EFF P1
Use up or down or sliders or GREYKEY1-6 to set DIM or EFF to each channel
，
if set to DIM
，
the channel will
be controlled the general output slider and LEVEL, otherwise it will be out of controlling
。
Get back to menu 10 after
