Инструкция для Involight MINIBEAM30

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

2

1. Description of the Device

1*30W high power white LED;

Power supply: 100~240VAC 50~60Hz

Rated power: 37W

Average of 50,000 hours of super-long LED life, low energy consumption, energy conservation

and environmental protection LED;

Quickly scan speed, Pan scanning 630 degree only 1.2 seconds, and Tilt scanning 235 degree

take 0.8 seconds;

High-speed electronic adjusting strobe and can reach 1 ~ 25 times/SEC or random strobe;

Fixture installed a power factor correction APFC switching power supply, PF > 0.99, the efficiency

is as high as 90%, the real green environmental protection;

●Light spot angle: 3º, strong beam effect, it’s 3 times as high as other manufacturers;

Total 10 inner program can selectable, can play by Auto or DMX controller;

Perfect blue LCD display, touch press buttons;

N.W: 2Kg

Packing Size: 18.5*24*27 cm

1. LED Display board
2. Menu
3. Up
4. Down
5. Enter

1
2
3
4
5
6
7
8
9
10
11
Оглавление инструкции
  • Страница 1 из 12
    Mini 30W White LED Beam Moving Head Light User Manual Please keep the manual carefully for future reference.
  • Страница 2 из 12
    Thank you for your patronage. We are confident that our excellent products and service can satisfy you. For your own safety, please read this user manual carefully before installing the device. In order to install , operate, and maintain the lighting safety and correctly. We suggest that the
  • Страница 3 из 12
    1. Description of the Device ●1*30W high power white LED; ●Power supply: 100~240VAC 50~60Hz ●Rated power: 37W ●Average of 50,000 hours of super-long LED life, low energy consumption, energy conservation and environmental protection LED; ●Quickly scan speed, Pan scanning 630 degree only 1.2 seconds,
  • Страница 4 из 12
    2. Safety Instructions CAUTION! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching wires! This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely
  • Страница 5 из 12
    General Guidelines ►This device is a lighting effect for professional use on stages, in discotheques, theaters, etc., the device was designed for indoor use only. ►This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in the last
  • Страница 6 из 12
    ►The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety rope.Never stand directly below the device when mounting, removing or servicing the fixture. ►The operator has to make sure the safety relating and machine technical installations are approved by
  • Страница 7 из 12
    XLR Mounting socket XLR Mounting plug DMX-512 connection with DMX terminator For installations where has it has too much lines or lights environment it is recommended to use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise. The DMX terminator
  • Страница 8 из 12
    6. Menu map and operation Display AddreSet MotorSet AutoProg MIC Cont MIC Sensy ChanTest NoSigSet Mode Set UserMode ResetDef Versions Data 1-512 PanRev TiltRev PanAdj Encoder PanMode Master/Slave Master/Slave 0-100% Set DMX channel and testing channel Close/Scene/Auto/Music Standard/Basic/User Mode
  • Страница 9 из 12
    Channel Instruction 8 channels (Standard) Channel Value Function Display 1 2 3 4 000-255 000-255 000-255 000-255 Pan: 5 000-255 6 000-255 Pan Pan fine Tilt Tilt fine Pan/Tilt movement speed(from fast to slow;226-235 off; more than 225, the quickest speed) White Strobe 0-16 Close 16-95 Strobe from
  • Страница 10 из 12
    Spectral wavelength analysis system Spectral wavelength analysis system Sample Item: MINIBEAM30 Testing Date: Dec.19,2013 Sample Number: Testing Time: 08:40:27 Color Technical Parameter Main Wavelength: 470.5 nm Color Temperature: 12370K 70.5 56.5 Environment Temperature: 25.0 ºC Environment
  • Страница 11 из 12
    Cleaning and maintenance The operator has to make sure that safety-relating and machine-technical installations are inspected by an expert after every four years in the course of an acceptance test. The operator has to make sure that safety-relating and machine-technical installations are inspected
  • Страница 12 из 12