![background image](/i/involight/105387/involight-minibeam30/h/involight-minibeam30-005.png)
4
General Guidelines
►
This device is a lighting effect for professional use on stages, in discotheques, theaters, etc., the
device was designed for indoor use only.
►
This fixture is only allowed to be operated with the max alternating current which stated in the
technical specifications in the last page of this manual.
►
The device can do
continuous
work for eight hours. Lighting effects are not designed for
permanent operation. Consistent operation breaks may ensure that the device will serve you for a long
time without defects.
►
Handle with care, do not make the device by strong shocks.
While choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. Please don't project the beam onto combustible substances.The minimum distance
between light-output from the projector and the illuminated surface must be more than 1 meter.
►Please do not in damp, overheat or dusty environment install and use the device. Do not use light
on fuel. The distance between the device and the projectile to keep at least 1 meter.
►If you use the quick lock cam in hanging up the fixture, please make sure the quick lock fasteners
turned in the quick lock holes correctly.
►Operate the device only after having familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional
operation.
►Please use the original packaging if the device is to be transported.
►For safety reasons, please be aware that all modifications on the device are forbidden.
►If this device will be operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to
short-circuit, burns, electric shock, lamp explosion, crash, etc.
3. Installation
Instruction
►The applicable temperature for the lighting is between -25°C to 45°C. Do not use the lighting under
or above the temperature.
►The installation of the effect has to be built and constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
CAUTION!
Please consider the GB7000.15/EN60598-2-17 and the other respective national norms during
The installation. The installation must only be carried out by a qualified person.