![background image](/i/karcher/165286/karcher-bd-90-140-r-bp-pack/h/karcher-bd-90-140-r-bp-pack-021.png)
English
21
While cleaning floors in hygiene-related ar-
eas (such as hospitals, supermarkets) and
for thoroughly cleaning very dirty floors.
Î
Open the cover of the fresh water reser-
voir.
Î
Fill up fresh water (maximum 60 °C) un-
til the lower edge of filling nozzle.
Î
Add detergent. Follow dosing instruc-
tions for detergent.
Î
Close the cover of the fresh water reser-
voir.
Detergent is added to the fresh water on the
way to the cleaning head with the help of a
dosaging device.
몇
Warning
Risk of damage to the dosing equipment.
Do not add detergent to the fresh water res-
ervoir.
Note
The dosing equipment can be used to add
3% of detergent at maximum.
Î
Place the detergent bottle in the holder
in the front on the fresh water reservoir.
Î
Close the bottle lid.
Î
Insert the suction hose of the dosing
equipment into the bottle. Ensure that
the sieve of the suction hose is lying at
the base of the bottle.
Î
Close the bottle using the lid of the dos-
ing equipment.
You can check the filling level of the bottle
through a vertical view window.
If the filling level of the detergent reaches
the bottom of the bottle:
Î
Add detergent or replace detergent bot-
tle.
몇
Warning
If you want to change the detergent type,
then first rinse the suction hose thoroughly
using fresh water (for 60 seconds using
maximum quantity of water and 3% dosing)
in order to avoid chemical reactions.
Note
When the detergent bottle is fully emptied,
then operate the dosing equipment for 60
seconds with maximum quantity of water
and 3% dosing so that the suction hose is
again fully filled up with the detergent.
Note
While refilling or replacing the detergent
bottle, hang in the suction hose of the dos-
ing equipment into the opened fresh water
tank so that no detergent drops fall on the
floor.
Note
If the fresh water tank is empty, then the
function of adding detergent gets deactivat-
ed. The cleaning head continues to work
without the addition of any liquid.
Note
As soon as the detergent pump starts run-
ning, this is indicated through a blinking "C"
in the display.
1 Driving
Driving to the Place of Use.
2 Scrubbing suction
Wet clean the floor and vacuum up dirt
water.
3 Wet scrubbing
Wet clean the floor and allow the deter-
gent to react.
4 Vacuuming
Suck in the dirt fleet.
5 Polishing
Polishing the floor without the applica-
tion of liquid.
6 Scrub the floor without applying water
(vacuum polishing)
Polish the floor without applying any flu-
id and suck in the polishing dust.
7 Manual cleaning
Apply liquid detergent using the wall-
ceiling-floor nozzle (optional) and vacu-
um it again.
Use the Info button to select the menu items
and do the settings.
– Turning the button to the right/left scrolls
through the menus forward/ backward.
– The selected setting gets accepted by
pressing the button.
You can make the settings for the different
cleaning programs in the operator menu.
Different parameters can be set based on
the cleaning program. The settings are
done using the Info button.
Î
Release emergency-stop button by
turning.
Î
Sit on the seat and set main switch to
“1”.
The display shows the battery charging
status and the fresh water level.
Î
Select cleaning program.
Î
Call the operator menu by turning the
info button.
Î
Select the desired parameter by turning
the Info button. The currently set value
is displayed as a bar.
Î
Press Info button, the bar display
blinks.
Î
Reset the parameter by turning the Info
button between "min" and "max".
Î
Accept modified setting by pressing the
Info button or wait till the set value is ac-
cepted automatically.
Note
If the selected parameter does not change
within 10 seconds, then the display goes
back to displaying the battery charging sta-
tus and the fresh water level.
The same cleaning parameter can have in-
dividual settings for each cleaning program.
The brush pressure can be set only when
the machine is on in the programs brush
suction, wet brushing, polishing and polish-
ing suction.
All settings are saved in the powerless state
of the machine.
Working without automatic detergent
dosing
Dosing equipment for detergent (op-
tional)
Cleaning Programs
Info button
1
2
3
4
5
6
7
Settings
Operations menu