48

49

СТИРАЛЬНАЯ МАШИНА АВТОМАТ 

AUTOMATIC WASHING MACHINE

СТИРАЛЬНАЯ МАШИНА АВТОМАТ 

AUTOMATIC WASHING MACHINE

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USEr GUIdE

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USEr GUIdE

Troubleshooting

P.26

P.27

Door lock 

problem

Door is not closed properly.

Restart after the door is closed.

Reason

Solution

Description

Display

  LED

Please call up service line if there are still troubles.

Drain problem 

while washing

Water injecting 

problem while 

washing 

Tap is not opened or water

flows too slowly.

Inlet valve filter is blocked.

Inlet pipe is twisted.

If water is not supplied

Open the tap or wait till the 

water supply becomes normal.

Check inlet valve filter.

Straighten the water pipe

Check the other taps in the 

room.

Please call up service line if there are still troubles.

Please call up service line if there are still troubles.

Outlet hose is blocked or twisted

Drain pump is blocked

Wash and straighten outlet hose.

Wash drain pump filter

Please call up the service line if there is any other problem.

Remove the problems

Troubles

Reason

Solution

Washing machine 

cannot start up

Check if the door is closed tightly.

Check if power plug is inserted well.

Check if water supply tap is opened.

Check if button “Start/Pause” is pressed.

Check if button “On/Off” is pressed.

Door cannot be 

opened

Heating fault

Water leakage

Water is 

overflowed from

the bottom of the

machine

Indicator or 

display does 

not light.

Detergent 

residues in the

box

Washing effects 

are not good 

Abnormal noise

Great vibration

The clothes are too dirty.

Insufficient detergent quantity.

Washing powder is dampened 

and agglomerated.

Power is disconnected.

PC board has problems.

Harness has connection 

problem.

The inlet pipe is not connected

 firmly.

Outlet hose has water leakage.

NTC is damaged and heating 

pipe is aging.

Machine's safety protection 

design is working.

The connection between inlet

 pipe or outlet hose and tap or 

washing machine is not tight. 

Drain pipe in the room is blocked.

Disconnect the power.

Can normally wash the clothes.

Only cannot wash with heating.

Shall contact the service center promptly.

Check and fasten water pipes. 

Clean up outlet hose and ask a 

specialized person to repair it when 

necessary.

Fix the inlet pipe.

Replace the drain hose.

Check if the power is shut down and 

power plug is connected correctly. 

If not, please call up service line.

Clean and wipe the box.

Use liquid detergents or the detergents 

special for drum.

Select a proper procedure.

Add the proper detergent quantity 

according to the instructions in 

detergent package.
Check if the fixing (bolts) has been removed.

If cabinet is installed on the solid and level 

floor.

Check if there are any barrettes or metal

articles inside.

Check if the legs in the washing machine 

are adjusted level. 

Troubleshooting

P.24

P.25

Appendix

Remove the problems

Door lock 

problem

Door is not closed properly.

Restart after the door is closed.

Reason

Solution

Description

Display

  LED

Please call up service line if there are still troubles.

Drain problem 

while washing

Water injecting 

problem while 

washing 

Tap is not opened or water

flows too slowly.

Inlet valve filter is blocked.

Inlet pipe is twisted.

If water is not supplied

Open the tap or wait till the 

water supply becomes normal.

Check inlet valve filter.

Straighten the water pipe

Check the other taps in the 

room.

Please call up service line if there are still troubles.

Please call up service line if there are still troubles.

Outlet hose is blocked or twisted

Drain pump is blocked

Wash and straighten outlet hose.

Wash drain pump filter

Please call up the service line if there is any other problem.

    The label and sign on the fabric can help you to choose the best way to launder your clothes.

Iron

Do not iron

Dry clean

Do not dry clean

Warm iron.medium

(max 150    )

C

Cool iron(max 110    )

C

A
F

Dry clean normal cycle

with any solvent

Dry clean normal cycle

petroleum solvent only

Dry flat

Tumble dry normal

Drip dry

Line dry 

/ hang to dry

Tumble dry. Low heat

(max 110    )

C

Tumble dry. Medium

(max 150    )

C

C

C

Bleach

Do not bleach

Hand wash

Do not wash

40

Warm wash

(max 40     )

C

Chlorine bleach

may be used

Normal wash

Gentle wash

Chlorine bleach

not be used

Do not tumble dry

Iron with cloth

Steam Iron 

Dry after wash 

Line Dry in shade

Warmly dry clean

No Wring

Line Dry

No machine wash

To avoid fire,electrical shock and other accidents,please remember the following reminding:

-    Only the voltage indicated in power label can be used. If you are not clear of the voltage 

     at home, please contact the local power bureau. 

-    When you are using the heating function, the maximum current through the washing 

     machine will reach 10A. Therefore, please make sure the power supply units (current, 

     voltage and cable) can meet the normal load requirements for the machine.

-    Protect the power cord properly. Power cord shall be fixed well so that it will not trip the 

     people or other things and be damaged. Special attention shall be paid to the socket. It 

     shall be plugged into the sockets easily and attention shall be paid to the plug location.

-    Do not make the wall-mounted socket overloaded or cable extended. Overloading of the 

     wiring may cause fire or electrical shock. Do not pull out power plug with wet hand.

-    To ensure your safety, power plug shall be inserted into an earthed three-pole socket. 

     Carefully check and ensure that your socket is properly and reliably earthed.

Appendix