26

ENGLISH

MAGIC REMOTE CONTROL FUNCTIONS

Registering Magic Remote 

Control

It is necessary to ‘pair’ (register) the magic 

remote control to your TV before it will work.

How to register the Magic Remote Control

BACK

HOME

P

MY APPS

1  To register automatically, 

turn the TV on and press the 

Wheel(OK)

 button. When 

registration is completed, the 

completion message appears 

on the screen.

2  If registration fails, turn the TV 

off and back on, then press the 

Wheel(OK)

 button to complete 

registration.

How to re-register the Magic Remote Control

BACK

SMART

1  Press and hold the 

BACK

and 

SMART

 buttons together 

for 5 seconds to reset, then 

register it by following “How 

to register the Magic Remote 

Control” above.

2  To re-register the Magic 

Remote Control, press and 

hold the 

BACK

 button for 5 

seconds toward the TV. When 

registration is completed, the 

completion message appears 

on the screen.

How to use Magic Remote 

Control

1  If the pointer disappears, move 

the Magic Remote Control 

slightly to left or right. Then, it 

will automatically appear on the 

screen.

»

If the pointer has not been 

used for a certain period of 
time, it will disappear.

2  You can move the pointer by 

aiming the Pointer Receiver of 

the Magic Remote Control at 

your TV then move it left, right, 

up or down.

»

If the pointer does not work 

properly, leave the Magic 

Remote Control for 10 seconds 

then use it again.

Precautions to Take when 

Using the Magic Remote 

Control

y

Use the Magic Remote Control within the 

maximum communication distance (10 m). 

Using the Magic Remote Control beyond 

this distance, or with an object obstructing 

it, may cause a communication failure.

y

A communication failure may occur due 

to nearby devices. Electrical devices such 

as a microwave oven or wireless LAN 

product may cause interference, as these 

use the same bandwidth (2.4 GHz) as the 

Magic Remote Control.

y

The Magic Remote Control may be 

damaged or may malfunction if it is 

dropped or receives a heavy impact.

y

Take care not to bump into nearby 

furniture or other people when using the 

Magic Remote Control.

y

Manufacturer and installer cannot provide 

service related to human safety as the 

applicable wireless device has possibility 

of electric wave interference.

y

It is recommended that an Access Point 

(AP) be located more than 1 m away from 

the TV. If the AP is installed closer than 

1 m, the Magic Remote Control may not 

perform as expected due to frequency 

interference.

1

If you press 

Wheel(OK)

 on the Magic 

Remote Control, the following screen 

appears. 

Shows information about the current 

programme and screen.

2

You can select More Menu.