. (If you

50

CARE AND MAINTENANCE

To Reverse the Doors

Lamp Replacement 

(For bulb lamp applied model only)

• The appliance is designed with reversible 

  doors so that they can open both on the 

  right and left sides to suit your kitchen 

  design. 

 However, when you want to reverse the 

 doors, you must call to service agent. 

 Reversing the doors is not covered by the 

 warranty.

Refrigerator work features

1. Unplug the power cort from the outlet. 
2. Remove the room lamp lid by 

taking down while 

pulling its back 

projection.

3. Remove the lamp by turning it 

counterclockwise and replace new one.

4. Assemble in reverse order of 

disassembly. Replacement bulb must be 

original.

the same specification as 

Lamp capacity is MAX 30W.

The lamp will remain “ON” for 7 minutes if 

the door is left open and then it is “OFF” 

reopen the door, the 

for safety

lamp is “On”).

You must check the O-RING, which is 

made by rubber and prevent electric

Don’t touch the lamp, in case of

long time. Because it can

NOTE

spark.

light on the

be very hot.

As a result of thermal strain for components of 

a refrigerator appliance can be heard crackling

noise that is not a defect and doesn’t affect 

efficiency of the appliance. This special sound 

when the thermo-regulator and compressor and

turned on is a normal state, which appears 

during the working process of appliance’s 

electric installation. 

The gas refrigerant produces a slight noise even

when the compressor is not running (this is not 

a defect.) 

While refrigerator appliance working process 

can be heard: 

- flick of the temperature relay;

- murmur of refrigerant flowing round cycle;

- cracking noise because of the materials 

  deformation by temperature. 

All that is not defect and doesn’t affect efficiency 

of the appliance.     

CAUTION!

CAUTION!

Downloaded from Fridge-Manual.com Manuals