![background image](/i/lg/157451/lg-lss464/h/lg-lss464-023.png)
23
Operation and settings
TTL range is 1-255.
Enable ARP Ping: If you want enable to ARP Ping setting by IP Utility, check to
>
“Enable ARP Ping”.
RTP stream
RTP (Real-time Transport Protocol) is an internet protocol that allows programs to manage
the real-time transmission of multimedia data, via unicast or multicast.
Video Stream
Selects the Video Stream from the drop-down list.
RTP unicast
Select when use the RTP unicast.
RTP multicast
Select when use the RTP multicast.
Multicast IP: Set the IP address for RTP multicast. The allowed IP address range
>
is 224.0.0.0 - 239.255.255.255.
Video Port: Set the Video RTP port number. The allowed port range is 1025-
>
65535.
Audio Port: Set the Audio RTP port number. The allowed port range is 1025-
>
65535.
Data Port: Set the VA RTP port number. The allowed port range is 1025-65535.
>
Note:
Each stream using multicast needs its own a pair of multicast IP address and port num-
bers to avoid address conflict.
TCP/IP
DHCP
Select when using the DHCP function. Network settings of this unit are configured
automatically by the DHCP server.
Static IP
Assign the IP address manually.
IP address: Enter an IP address.
>
Subnet mask: Enter a subnet mask address.
>
Gateway: Enter the gateway address.
>
DNS server: Enter the DNS server address. DNS (Domain Name Service) pro-
>
vides the translation of domain name to IP addresses on your network.
Secondary DNS server: Enter the Secondary DNS server address.
>
Note:
If you change the IP Address or Type (Static
b
DHCP, DHCP
b
Static), the device
connection is disconnected and all of operation is disabled. To connect the device
again, remove and re-register the device using the “Add/Edit/Remove Device”
menu.
Apply: Click to confirm the settings.
•