11

Control Panel Functions

Use this button to enter a selection in the On Screen 
Display.

AUTO/SET
Button

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press
the 

AUTO/SET

button before entering the On Screen

Display(OSD). (Only Analog Mode)

This will automatically adjust your display image to the
ideal settings for the current screen resolution size
(display mode).

The best display mode is

1600 x 900

Buttons

Use these buttons to select or adjust functions in the On
Screen Display.

Use this function to select optimal image conditions in
accordance with the surrounding environment
(Brightness, Image type). 
For more information, refer to page 17.

Use this button to turn the display on or off.

Power Button

When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub. 

(SOURCE Hot key)

The power indicator stays red if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking red. 

Power Indicator

This is the sensor to measure the external brightness. 

Light Sensor

Makes the screen brighter or darker, depending on the
surrounding brightness, when AUTO BRIGHT is set to
ON. The default setting is OFF.